One of the classic causes of leaking roofs is the wrong position of the tiles. There are various factors that cause the sagging roof. The reasons for this are, among others, the result of the strong winds that have made it a playground for cats. So that your tiles don’t sag easily, try the following tips. Put nails in the battens that are located under the tiles. Nails can withstand the rate of sagging tiles. Another thing you should pay attention to is adjusting the tilt of the tiles. Ceramic and clay tiles should have a slope of between 30-45 degrees. Do not forget that the roof and asbestos must have a slope of approximately 15 degrees. Also, avoid installing too many roof joints because these joints are also prone to leaks due to the pores being eroded by rainwater. In the meantime, if you need to reposition your roof with help from professionals, you can hire Roofing Companies Afton OK.
Then, replace the damaged and brittle tiles with new tiles. Roof tiles that are cracked and brittle are prone to breaking during strong winds. Cracked roof tiles can also cause rainwater to seepage into the house. Do not let sand and moss deposits on the roof of the house as this can accelerate the rate of roof damage. Clean all kinds of dirt at least once a month during the rainy season.
Furthermore, add a plastic layer on your roof. This simple method is very effective in overcoming roof leaks. You can cover the roof of the house with a wide plastic before applying the tiles. After the wooden or steel roof structure has been installed, cover it with new plastic then arrange the tiles neatly. This plastic layer can protect the roof from leaks and can also keep gravel and sand from entering from narrow gaps. Apart from plastic, another material that you can use to coat the roof is a special aluminum foil which is designed to reduce heat and water resistance. Simple ways to deal with this leakage are mostly done in rural areas.